checkra1n Jailbreak Windows, LINUX and Mac guide

In this tutorial, we are covering how to install checkra1n jailbreak on iOS 13, iOS 12 and Step guide to install Ra1nUSB, Ra1nStorm, bootra1n Tool Linux and windows computer for the checkrain Jailbreak tool.

Checkra1n Permanent jailbreak just released for iOS 12.3, 13.3 and iOS 13.3.1 Beta.

checkra1n for Linux is now available.

checkra1n for Linux is now available. Now you can install checkra1n jailbreak on iOs 13, iOS 12 using Linux computers.

checkra1n 0.9.8 beta

05.02.2020

This release is a beta preview and as such should not be installed on a primary device. This is the first checkra1n release which adds support for Linux.

Download for macOSGet
Download for Linux (CLI, x86_64)Get
Download for Linux (CLI, arm)Get
Download for Linux (CLI, arm64)Get
 Download for Linux (CLI, i486)Get

Checkra1n Jailbreak iOS 13 – iOS 12.4

CheckRa1n / checkrain is a permanent jailbreak tool developed by checkm8 jailbreak exploit.

Developer axi0mx and his team including ih8sn0w, jonseals, pshycotea, qwertyoruiop, nullpixel, xerub, siguza, and others, have developed this checkra1n jailbreak tool. Also, its called as checkrain jailbreak

iOS 13.2.3 Checkrain Jailbreak Guide iOS 13.2.3 users cannot put DFU mode during the Checkra1n Jailbreak process. So you have to put your Device to DFU mode manually before starting the process. Follow below guide to jailbreak your iOS 13.2.3 Device. Step 01 - Put your Device to DFU manually Step 02 - Download Checkra1n from official site Step 03 - Drag and Drop Checkra1n DMG file to run Step 04 - Now open Checkra1n Step 05 - Now connect your Device to PC Step 06 - Tap Start Button

The checkran jailbreak has been demonstrated running on iOS 13.1.2, 13.1.3, iOS 13.2 and even 13.3

  • Presumably, the jailbreak will also support future versions of iOS 13 and maybe even other versions of iOS as it uses an unpatchable bug found in the boot code which is flashed at the factory and read-only.

Checkra1n Windows Tutorial 1

There is another new Checkrain Jailbreak windows Installation Tool released by OxFoxlet –    bootra1n Live CD, to install checkra1n Jailbreak with straightforward steps.

If you would like to install checkra1n jailbreak with the Bootra1n installation tool, please refer to this checkra1n jailbreak windows installation with the bootra1n tutorial.

Alternatively, you can proceed with the following tutorial on installing Chekrain jailbreak on Windows PC to get 100% better results.

ra1nUSB – Install checkra1n Jailbreak Without MAC (Updated)

What is ra1nUSB outstanding?

Ra1nUSB is the unofficial solution for install checkra1n jailbreak on windows running AMD or Intel Computer.

No need for macOS, no Macbook, no iMac, all you need is a USB stick. Ra1nUSB is faster than Hackintosh

What are the Requirements?

  • You only need a minimum USB of 2GB
  • Also, you can use Memory cards and Card readers

Watch – Checkra1n Jailbreak on Windows: ra1nUSB full tutorial

Step 1

Downloadra1nUSB

Please select the correct version for your computer

Checkra1n Jailbreak For Aser Computer
INTEL
Checkra1n Jailbreak For DellComputer
AMD

FOR INTEL

  • Intel CPU
  • My core
  • Xeon
  • Celeron

Bios Settings

  • UEFI/Legacy BIOS

Back to – Step 1

FOR AMD

  • CPU AMD
  • FX
  • Ryzen
  • Zen Athlon
  • UEFI

Bios Settings

  • UEFI/Legacy BIOS

Back to – Step 1

Step 2

After Download ra1nUSB Please download Etcher – Balena Tool

Use this tool to install Ra1nUSB to USB device – Download Etcher – Balena tool

Step 3

  • Plug USB into the computer
  • Open Etcher Tool
  • Select Ra1nUSB .dmg file
  • Select USB Device
  • Click Flash ( This will take a 10 – 20 min)

Step 4

  • After finish flashing – Reboot Your PC
  • Press F12 (boot key) – This depends on your PC
  • Select the USB device
If you did not see this Please go to bios settings and reset it to default
  • ra1nUSB WIl loading
  • Click on Boot From Mac OS Button
  • After you can see Loading Apple Logo
  • When Ra1nUSB loaded Click Continue
  • At the top menu Click Utilities -> Terminal
  • Type ra1nusb

Congrats You Done

Now follow Checkra1n Jailbreak Installation Process

If this method doesn’t help you.
Please try with other solutions to install Checkra1n Windows.

UO4S Store

The new UO4S App Store (u04) provides the ability to install unc0ver Jailbreak applications without a computer. (revoke fixed for uncover jailbreak )

UO4S store is one of the best jailbreak solutions for iOS 13, iOS 13.1, iOS 13.2, iOS 13.2.2iOS 13.3 and  It has 1000+ Jailbreak Tweaks, Cydia-apps, Hacked Games and more…

Quick Links –

iOS 12.4 – iOS 13 Jailbreak Solutions Released ( Now supports the A7 – A12, A13 processor)

Install Cydia & Run Jailbreak apps and tweaks on iOS 12.4 -iOS 13 without a computer.

Checkra1n alternative Checkra1n Windows
Checkra1n For iOS 13 Checkra1n For iOS 13.2
iOS 13.3 Jailbreak Checkra1n For iOS 12

Checkra1n Windows Tutorial 2

Before you start

Take a deep breath and take your time – this is pretty simple, but it is easy to miss things if you rush.

Step 1

Download latest Checkrain jailbreak using below buttons

Checkra1n / Ra1nStorm Download Section

  • Download Checkra1n Jailbreak tool for Mac OS

Checkra1n Jailbreak Window Installation Guide

  • Download Checkra1n Jailbreak for Windows OS ( Windows 10, 8, 7 )

ra1nstorm Tool Window Installation Guide

  • For Install Checkra1n Jailbreak (checkran app) Online through your iPhone/Ipad

* Checkra1n Jailbreak online install Eta Son

Checkra1n jailbreak Previous Versions

Released DateVersionDownload
14/12/20190.9.7 betaCheckra1n jailbreak 0.9.7 beta
16/11/20190.9.5 betaCheckra1n jailbreak 0.9.5 beta
10/11/20190.9.2-betaCheckra1n jailbreak 0.9.2 beta
09/11/20190.9 -betaCheckra1n jailbreak 0.9 beta


How to install checkra1n Jailbreak on Windows and Mac Pc

After downloading the Checkra1n Jailbreak setup, follow these steps to install “checkrain” on Windows PC

Step 2

Please select your computer model to install “Checkra1n” Jailbreak

Checkra1n Jailbreak For Aser Computer
ASER
Checkra1n Jailbreak For DellComputer
DELL
Checkra1n Jailbreak For HP Computer
HP
Checkra1n Jailbreak For lenovo Computer
Lenovo
Checkra1n Jailbreak For lenovo Computer
Other

Step 3

Select your Windows OS version to find the best Jailbreak Method.

Checkra1n for windows 10
Windows 10
Checkra1n for windows 8
Windows 8
Checkra1n for windows 7
Windows 7
Checkra1n for windows Xp
Windows XP
Checkra1n Jailbreak For lenovo Computer
Other

Checkra1n OS compatibility – Q & A

Q – Does Chekra1n support with Windows XP?

A – Sorry, Checkra1n Jailbreak does not support Windows XP

Q – Does Chekra1n support with other OS?

A – Currently, the Chekrain Jailbreak is compatible with Mac OS and Linux OS.

You can follow this guide to install Chakra1n Jailbreak on Mac and Linux OS

Congratulations, you can install “checkra1n” jailbreak to your computer

Steps by Step guide to prepare your Mac / Windows Pc to checkra1n Jailbreak tool.

There are two main ways to install the Chekra1n Jailbreak on Windows PC

  1. Method 1 – Install MacOS macOS Mojave
  2. Method 2 – Run Checkran jailbreak through VM ( Install Ra1nStorm tool )

Method 1

Checkra1n jailbreak Windows installation Guide – macOS Mojave.

The following guide is a complete walkthrough for updating or installing a fresh version of macOS Mojave.

Checkra1n beta officially released only for macOS users. Windows and Linux will be added soon. Until then you can use Ra1nstorm 0.9.2 to run Checkrain jailbreak on your Windows. Checkra1n for AppleTV also available. All in one L1ghtning recovery utility for checkra1n jailbreak.

Table of Contents

  • Step 1: Download macOS Mojave
  • Step 2: Create a Bootable USB with BalenaEtcher
  • Step 3: Recommended BIOS Settings
  • Step 4: Install macOS Mojave
  • Step 5: Install Checkra1n jailbreak On Mojave
  • Troubleshooting and Optimizations

Before You Begin

  1. Get our latest  BalenaEtcher tool from the downloads section.
  2. Purchase a 16GB or larger USB drive.
  3. Do a full backup of your system. We strongly recommend performing a full backup of your existing system using Carbon Copy Cloner. By doing this, you can always go back to your working installation.
  4. Download macOS Mojave from the downloads section.

Download Section –

BalendaEtcher is a tool that creates a bootable installer out of your downloaded version of macOS.

In order to start fresh, you will need access to a functional computer running OS X Lion 10.7.5 or later.

STEP 1: Download macOS Mojave

​The full operating system is a free download for anyone who has purchased Mac OS X Snow Leopard, Lion, or Mountain Lion or has a Mac preloaded with OS X Mavericks, Yosemite, El Capitan, macOS Sierra, or macOS High Sierra.

Download the Application from the Mac App Store using your Apple ID on any of these specific Macs:

  • MacBook (Early 2015 or newer)
  • MacBook Air (Mid 2012 or newer)
  • MacBook Pro (Mid 2012 or newer)
  • Mac mini (Late 2012 or newer)
  • iMac (Late 2012 or newer)
  • iMac Pro (2017)
  • Mac Pro (Late 2013, plus mid-2010 and mid-2012 models with recommended Metal-capable GPU)

Method 1 – Download Mojave From Apple Store

  1. Open Mac App Store
  2. Log in with your Apple ID
  3. Download macOS Mojave

Download Mojave directly.

Use one link from below button

Google drive

Yandex

** Installation File Contents:

  • Config Files:
    Config.plist files for Intel Laptop and AMD Ryzen, FX and A series. Usage information is shared below.
  • SSDT Files SSDT files that
    may be useful after installation. The descriptions of these SSDTs are described in the folder “READ ME”.
  • Applications :
    Many applications that will be useful after installation. The usage details of all applications were shared in the folder contents.

The Application Install macOS Mojave will appear in /Applications.

Applications : Many applications that will be useful after installation. The usage details of all applications were shared in the folder contents.

STEP 2: Create a Bootable USB Drive with balenaEtcher

Take a deep breath and take your time- this is pretty simple, but it is easy to miss things if you rush.

To print the Windows USB on Mac OS:

Insert the USB drive

– Format USB in MS-DOS (FAT) and Master Boot Record (MBR) in Disk Utility.
– Open the iso file, select all and copy it into USB. Your Windows USB is ready.

OR

Create a Bootable USB Drive with UniBeast

Open /Applications/Utilities/Disk Utility

Highlight the USB drive in the left column (Note: in the Mojave version of Disk Utility, you must first select View / Show All Devices before you can see the USB drive there)

Highlight the USB drive in left column (Note: in the Mojave version of Disk Utility, you must first select View / Show All Devices before you can see the USB drive there)

  1. Click Erase button
  2. For Name: type USB (You can rename it later)
  3. For Format: choose Mac OS Extended (Journaled)
Highlight the USB drive in left column (Note: in the Mojave version of Disk Utility, you must first select View / Show All Devices before you can see the USB drive there)

​7. Click Erase then Done

The full operating system is a free download for anyone who has purchased Mac OS X Snow Leopard, Lion, or Mountain Lion or has a Mac preloaded with OS X Mavericks, Yosemite, El Capitan, macOS Sierra, or macOS High Sierra.

  1. Download and run UniBeast
  2. Click ContinueContinueContinueContinueAgree
  3. At Destination Select, choose USB and click Continue
The full operating system is a free download for anyone who has purchased Mac OS X Snow Leopard, Lion, or Mountain Lion or has a Mac preloaded with OS X Mavericks, Yosemite, El Capitan, macOS Sierra, or macOS High Sierra.

  1. At Select, OS Installation screen choose Mojave and click Continue
  2. At Bootloader Options screen choose UEFI Boot Mode or Legacy Boot Mode. UEFI Boot Mode is recommended for 7/8/9/100/200/300 Series CustoMac desktops and all UEFI capable systems. Legacy Boot Mode is recommended for 5/6 Series CustoMac desktops and all BIOS-based systems.
At Bootloader Options screen choose UEFI Boot Mode or Legacy Boot Mode. UEFI Boot Mode is recommended for 7/8/9/100/200/300 Series CustoMac desktops and all UEFI capable systems. Legacy Boot Mode is recommended for 5/6 Series CustoMac desktops and all BIOS-based systems.

  1. (Optional) At Graphics Configuration screen choose the appropriate graphics option for your system and click Continue.
  2. Verify installation options, then click Continue, enter the password and click Install
371917

​UniBeast will now create the bootable USB drive. The process will only take about 10 minutes, depending on the system and drive speed.

Do not unplug or stop during this time.

​15. Drag MultiBeast to your completed USB drive.

Clover Note: UniBeast delivers basic bootloader support based on our testing on recommended CustoMac systems. For further bootloader customization, download and run the official Clover package. Advanced users may also compile Clover by downloading the full source.

STEP 3: Recommended BIOS Settings

If you’re installing on a recommended CustoMac desktop with AMI UEFI BIOS, the options are simple.

For other systems make sure to set your BIOS to Optimized Defaults, and your hard drive to AHCI mode. Here are standard AMI UEFI BIOS settings for Gigabyte AMI UEFI BIOSGigabyte AWARD BIOSASUS AMI UEFI BIOS, and MSI AMI UEFI BIOS.

  1. To access BIOS/UEFI Setup, press and hold Delete on a USB Keyboard while the system is booting up(F2 -on some device)
  2. Load Optimized Defaults
  3. If your CPU supports VT-d, disable it
  4. If your system has CFG-Lock, disable it
  5. If your system has Secure Boot Mode, disable it
  6. Set OS Type to Other OS
  7. If your system has IO Serial Port, disable it
  8. Set XHCI Handoff to Enabled
  9. If you have a 6 series or x58 system with AWARD BIOS, disable USB 3.0
  10. Save and exit.

BIOS Settings (Intel)

  • Before you start, reset your BIOS settings to the default settings (Load Default Settings).
  • SATA: Set to AHCI
  • VT-D: Set to Disable
  • EHCI Hand-off / xHCI Hand-off: Set to Enable.
  • xHCI Mode: Smart Auto
  • Secureboot: Set to Disable (Other OS)
  • CFG-Lock = Disable
  • Boot Option Priorities: Set to UEFI USB. Or UEFI and Legacy.

BIOS Settings (AMD Ryzen)

  • Before you start, reset your BIOS settings to the default settings (Load Default Settings).
  • OC Tweaker -> Load XMP Setting: XMP 2.0 Profile 1
  • Advanced \ CPU Configuration -> SWM Mode = Enabled
  • Advanced \ North Bridge Configuration -> IOMMU: Disabled
  • Advanced \ South Bridge Configuration -> Deep Sleep : Disabled
  • Advanced \ Storage Configuration -> Sata Mode: AHCI Mode
  • Advanced \ AMD CBS \ FCH Common Options \ USB Configuration Options -> XCHCI controller enable: Enabled
  • Advanced \ AMD CBS / NBIO Common Options \ NB Configuration -> IOMMU: Disabled
  • Security -> Secure Boot: Disabled
  • Boot -> Fast Boot: Disabled

** Not all systems have the same BIOS settings. Apply whatever settings you have.

You're almost done! All you need to do is boot from the USB drive and install it! For best results, insert the USB in a USB 2.0 port.


STEP 4: Install macOS Mojave
You’re almost done! All you need to do is boot from the USB drive and install it! For best results, insert the USB in a USB 2.0 port.

  1. Turn on the computer
  2. Press the hotkey to choose boot device (F12 for Gigabyte motherboards, F8 for ASUS motherboards, F11 for ASrock motherboards)
  3. Choose USB
CheckRa1n is a permanent jailbreak tool developed by checkm8 jailbreak exploit. Developer axi0mx and his team including ih8sn0w, jonseals, pshycotea, qwertyoruiop, nullpixel, xerub, siguza, and others, have developed this checkra1n jailbreak tool.Also, its called as check rain jailbreak.
  1. At Clover boot screen, choose Boot OS X Install from Install macOS Mojave
  2. When you arrive at the Installer, choose a language.

If you have issues reaching the installer, you can use the spacebar on the boot screen to enter alternate boot modes such as verbose and safe mode. For more instructions on entering the boot, flags see Clover Basics and Switching Advice.

6. For a new installation of macOS, you MUST erase and format the destination drive according to the following steps before continuing.
a. In the top menu bar choose Utilities and open Disk Utility​b. Highlight your target drive for the Mojave installation in the left column.​c. Click Erase button​d. For Name: type Mojave (You can rename it later)​e. For Format: choose Mac OS Extended (Journaled)​f. Click Erase​g. Close Disk Utility

  1. When the installer asks you where to install, choose Mojave
  2. Upon completion, the system will automatically restart.
  3. Press the hotkey to choose boot device (F12 for Gigabyte motherboards, F8 for ASUS motherboards, F11 for ASrock motherboards)
  4. Choose USB
  5. At the Boot Screen, choose Mojave
  6. Complete macOS installation. The system will automatically reboot.
In this article, we are covering how to install checkra1n jailbreak iOS 13 , iOS 12 and step by step guide to preparing your mac and windows computer for the checkra1n Jailbreak tool.

STEP 5: Post Installation with MultiBeast
MultiBeast is an all-in-one post-installation tool designed to enable boot from hard drive, and install support for Audio, Network, and Graphics. The installation is complete, but the drive isn’t bootable yet.

Boot from the USB again, this time choosing Mojave.

  1. Press the hotkey to choose boot device (F12 for Gigabyte motherboards, F8 for ASUS motherboards, F11 for ASrock motherboards)
  2. Choose USB
  3. At the Boot Screen, choose your new Mojave installation.
  4. Complete macOS setup
  5. Open and run MultiBeast
In this article, we are covering how to install checkra1n jailbreak iOS 13 , iOS 12 and step by step guide to preparing your mac and windows computer for the checkra1n Jailbreak tool.

​6. If this is a fresh installation, click QuickStart. UEFI Boot Mode is recommended for 7/8/9/100/200/300 Series CustoMac desktops and all UEFI capable systems.

Legacy Boot Mode is recommended for 5/6 Series CustoMac desktops and all BIOS-based systems.

CheckRa1n is permanent jailbreak for every iOS version running A5-A11 devices. It’s called as check rain jailbreak also.This is based on the unpatchable bootrom exploit called Checkm8. It cannot fix without a hardware replacement.

  1. Choose the appropriate Driver options for your system.
  2. Click Customize for further options
CheckRa1n is permanent jailbreak for every iOS version running A5-A11 devices. It’s called as check rain jailbreak also.This is based on the unpatchable bootrom exploit called Checkm8. It cannot fix without a hardware replacement.

  1. Click Print or Save to back up your configuration
  2. Click Build then Install
380946

​If using a GeForce GTX 1050, 1050 Ti, 1060, 1070, 1070 Ti, 1080, 1080 Ti, TITAN Pascal, and TITAN Xp ‘Pascal’ graphics card or NVIDIA GeForce GTX 750, 750 Ti, 950, 960, 970, 980, 980 Ti, and TITAN X ‘Maxwell’ graphics card, macOS Mojave graphics drivers are not natively supported. Alternate NVIDIA drivers are required.

Note: Alternate NVIDIA Graphics Drivers are not available yet- if you have a Maxwell or Pascal-based NVIDIA card, stay on High Sierra for now.

  1. (Optional) Download and install Alternate NVIDIA Graphics Drivers
  2. Reboot
You now have a fully updated bootable version of macOS Mojave on your CustoMac! And a super handy USB rescue drive. It's easy to get frustrated, but don't give up!


Yay! You now have a fully updated bootable version of macOS Mojave on your CustoMac! And a super handy USB rescue drive. It’s easy to get frustrated, but don’t give up! If you get stuck, there are many users with similar hardware in the tonymacx86 Forum to provide support. Thanks to all of the hard-working developers, hackers, and testers all over the world without whom this guide would never have been possible.

Tested Systems;

  • Asus Z170 Deluxe, i7 6700k, RX 580
  • Ryzen 3 1200, Asrock AB350, GTX 680
  • HP Pavillion, q8300, GT 220, GT 630

Method 2

Checkra1n jailbreak for Windows (Ra1nStorm tool) installation Guide.

How to Run checkra1n jailbreak through macOS VM on Windows PC?

Do you interest to jailbreak your device using checkra1n on Windows or Linux, there is an unofficial solution. 

Download ra1nstorm helper and that will automatically configure a Linux Ubuntu environment to run checkra1n from a virtual machine.

Checkra1n Jailbreak Checkra1n Permanent jailbreak just released for iOS 12.3, and the latest versions include iOS 13.2.3 and iOS 13.3 Beta.Checkra1n still compatible for MacOS and you can use ra1nstorm Unofficial tool to use Checkra1n in Windows / Linux. Checkra1n Jailbreak Device compatible All A6 to A11 Devices are compatible with Checkrain jailbreak. iPhone 5C , iPhone 5S, iPhone 6 , iPhone 6+ , iPhone 6S , iPhone 6S+ iPhone SE, iPhone 7, iPhone 7+ , iPhone 8 / iPhone 8+, iPhone X iPad Mini 2, iPad Mini 3, iPad Mini 4, iPad Air, iPad Pro (12.9 in), iPad Pro (9.7 in) , iPad Pro (10.5 in), iPad 6G, iPad 7G Unsupported Devices for checkra1n iPhone 11 Pro , iPhone 11 , iPhone 11 Pro Max , iPhone XR , iPhone XS Max , iPhone XS , iPhone XS Max
  • Download Checkra1n Jailbreak ( Ra1nStorm Tool ) tool for Windows OS
  • Download Checkra1n Jailbreak ( Ra1nStorm Tool ) tool for Linux OS

How to install checkra1n Jailbreak

  • checkrain jailbreak was initially being run on macOS only and now works on both Linux and Windows versions.

checkra1n  0.9.7-beta released  **

iOS 13.2.3 Checkrain Jailbreak Guide iOS 13.2.3 users cannot put DFU mode during the Checkra1n Jailbreak process. So you have to put your Device to DFU mode manually before starting the process. Follow below guide to jailbreak your iOS 13.2.3 Device. Step 01 - Put your Device to DFU manually Step 02 - Download Checkra1n from official site Step 03 - Drag and Drop Checkra1n DMG file to run Step 04 - Now open Checkra1n Step 05 - Now connect your Device to PC Step 06 - Tap Start Button

iPhone 5s – iPhone X, iOS 12.3 , iOS 13 and up



What’s new

Checkra1n Jailbreak For Linux

Checkra1n for Linux is purportedly almost complete!! – Developer – @NikiasBassen

Update on #checkra1n for #Linux: sorry for the long delay. There were issues we didn’t expect to be so problematic, USB controllers misbehaving being the biggest issue followed by dependency hell. But we’re on it and hopefully eta son. It’s ready when it’s ready.

checkra1n on Windows tool v1.0 soon.. Signed

checkra1n jailbreak windows status

driver. By – @jifa

Bug fixes

  • Fixes an issue which prevented the GUI from detecting changes in device modes
  • Fixes an issue that caused the GUI to hang when jailbreaking some iPad models

Other changes

  • Add initial Apple TV 4K support
  • Purge OTA updates on boot
  • Add support for iOS 13.3
  • Remove libimobile device as a dependency
  • Properly handle situations where there’s no internet connection available while bootstrapping tvOS
  • Add a Control Center shortcut for the tvOS loader app

If you are experiencing the -20, please re-jailbreak with the no-substrate mode option checked in the app, and see if removing tweaks resolves your issue.

checkra1n jailbreak status

The One Weird Trick SecureROM Hates by @qwertyoruiopz at #36c3 – 30.12.2019

According to this Discussion – The Chekra1n Jailbreak, Linux is expected to arrive at the end of the year. Windows is coming in the next few months.

Checkra1n Windows release date has not yet been announce. But you can install Chekrain Jailbreak on Windows OS using alternative methods.

Checkra1n Jailbreak Alternatives-

You can easily install the app by clicking on the link and it will help you to install popular Jailbreak apps, repos, tweaks, games and more…

Apple TV 4K has been jailbreak using the Chekra1n

checkra1n jailbreak supports with Apple TV (1st, 2nd, 3rd, and 4th generation) on tvOS 13.

Developer @LittleStyle has confirmed that the first version of the Chekra1n Jailbreak at 0.9.7 successfully supported the Apple TV with 4K devices without a new patch.

0.9.7 is also the first version that can successfully jailbreak the 4K fully without needing special patches. It’s a little rough around the edges (the -20 known issue) but it works well

Changes in the new release

  • Add initial Apple TV 4K support.
  • Add a Control Center shortcut for the tvOS loader app.

Errors & Solutions while running checkra1n jailbreak on Apple TV 4K

Error: The Apple TV 4K will produce a -20 error, even on a successful jailbreak
How to fix: If you are experiencing the -20, please re-jailbreak with the no-substrate mode option checked in the app.

iOS 13 – iOS 13.2.3 Jailbreak Done with Checkra1n

an iOS 13 jailbreak for the iPhone X (A11 CPU) and lower has now released! Checkra1n is now available to jailbreak iOS 13 – iOS 13.2.3! Unfortunately though, this does not support for A12 or A13. A13 devices include the iPhone 11, 11 Pro, and 11 Pro Max. Devices powered by A12 are as follows: iPhone XS Max, XS, XR and 2018 iPad Pro models. There are also a lot of caveats with the first checkra1n iOS 13 jailbreak utility. Think of checkra1n’s first release as a developer preview jailbreak that you can test right now (provided you can live with the limitations).

Apple has released iOS 13.2.3 for the public. This OS update mainly focuses on bug fixes and performance improvements.

iOS 13 jailbreak for the iPhone X (A11 CPU) and lower has now released!

Checkra1n is now available to jailbreak iOS 13 – iOS 13.2.3! Unfortunately, though, this does not support A12 or A13. A13 devices include the iPhone 11, 11 Pro, and 11 Pro Max.

Devices powered by A12 are as follows: iPhone XS Max, XS, XR, and 2018 iPad Pro models. iOS 13.2.3 jailbreak with checkra1n update might soon become a reality.


iOS 13.2 – iOS 13.2.3 jailbreak solutions

There is a two Jailbreak solution that can use instead of the checkra1n jailbreak.

1. PikZo iOs 13-iOS 13.3 Jailbreak Solution

1. Zee-Store for iOS 12 – iOS 13 Jailbreak Solution


CheckRa1n jailbreak Installation Guide –

With Computer / PC

Now you can easily download, CheckRa1n jailbreak Tool through using the above button 

Step 1:

Download the CheckRa1n Jailbreak for iOS 13 – iOS 13.1 – iOS 13.2 Tool onto your computer.

Step 2:

Open dmg file and click checkra1n button

Checkrain Install

Checkra1n is now available to jailbreak iOS 13 – iOS 13.2.3! Unfortunately, though, this does not support A12 or A13. A13 devices include the iPhone 11, 11 Pro, and 11 Pro Max.

Step 3:

CheckRa1n is a permanent jailbreak tool developed by checkm8 jailbreak exploit. Developer axi0mx and his team including ih8sn0w, jonseals, pshycotea, qwertyoruiop, nullpixel, xerub, siguza, and others, have developed this checkra1n jailbreak tool.Also, its called as check rain jailbreak.

Connect your device to your computer using a USB cable. And enter DFU Mode

(DFU Mode – Press and hold the Power button and Home button together (10 S)

Release the Power button BUT KEEP HOLDING THE Home button)

Step 4: 

Press Start Button

Step 5: 

Checkra1n is now available to jailbreak iOS 13 – iOS 13.2.3! Unfortunately, though, this does not support A12 or A13. A13 devices include the iPhone 11, 11 Pro, and 11 Pro Max.

Wait for a few seconds…

Open CheckRa1n app on your home screen and hit install Cydia

Checkra1n is now available to jailbreak iOS 13 – iOS 13.2.3! Unfortunately, though, this does not support A12 or A13.

Enjoy it.


Advantages of Checkra1n Jailbreak

  1. Cannot be patched by any iOS update
  2. Once jailbroken it will last until user unjailbreak it
  3. Tap on unc0ver Jailbreak
  4. Can use for any iOS version (stated by developers)
  5. Latest coming versions also will be compatible with the jailbreak
  6. Will be a tethered jailbreak

Checkra1n Jailbreak Device Compatibility

We assumed that the checkra1n jailbreak will run on all devices that support both checkm8 (A7 – A11) and iOS 13 (A8+2GB RAM – A11) which include:

  • The iPhone 6S to the iPhone X (included)
    • iPhone 6 & iPhone 6 Plus, iPhone SE, iPhone 7 & iPhone 7 Plus, iPhone 8 & iPhone 8 Plus, iPhone X
  • All iPad, iPad Pro, and iPad Air models excluding:
    • 2018 iPad Pro models
    • iPad Mini 5
    • iPad Air 3 (2019)

The iPod Touch 7th generation – yeah, iPod Touches still exist and the jailbreak has been demonstrated running on one of them.

nitoTV’s creator seems to be working on an Apple TV variant of checkra1n, but it’s unknown whether that’ll be released next week

Unsupported Devices for checkra1n

iPhone 11 Pro, iPhone 11, iPhone 11 Pro Max, iPhone XR, iPhone XS Max, iPhone XS, iPhone XS Max.

CheckRa1n jailbreak running Cydia and Zebra package managers -27 th October It has published an image of an iPhone SE with iOS 13.1.2 running the Zebra, an iPod touch (seventh genn) with iOS 13.1.3 running Cydia in official checkra1n . Also, there is an image of an iPhone X running an unknown version of iOS with the Cydia app on its Home screen. So, it seems, CheckRa1n coming with two package managers. Cydia is the most popular and everyone knows about Cydia. Zebra is an alternative package manager to Cydia. Previously, Zebra was available on the official Cydia Repository. Also, it was completely open source and located on GitHub. So, Checkra1n will be coming with cydia as well as this newly updated zebra package manager.

@qwertyoruiopz , “The One Weird Trick SecureROM Hates” PDF download here

checkra1n Jailbreak Alternatives

Jailbreak is the process of removing Apple software restrictions for iOS devices. Usually, iOS users can install apps from the Apple App Store only.

Jailbreak is the only way to install iOS system tweaks, themes, customization apps and many kinds of Apple dissentient apps.

At this time, several Jailbreak tools released for iOS 13, iOS 12 to iOS 12.2 Jailbreak & iOS 12.4 Jailbreak.

It should use an alternative jailbreak solutions to install jailbreak apps on other iOS 12.3 to iOS 12.3.2, iOS 12.4.1, iOS 12.4.2, iOS 13, iOS 13.1, iOS 13.1.1, iOS 13.1.2, iOS 13.1.3 & iOS 13.2 beta versions.  you can easily install checkra1n jailbreak alternatives by clicking the following button.


Jailbreak alternatives

PiKzo jailbreakGet
Zeejb app storeGet
UO4S StoreGet
Hexxa plusGet

Chekra1n jailbreak latest updates

Checkra1n for Linux is now available.

checkra1n jailbreak has updated the tool today to add support for iOS 13.3.1. More importantly, this is the first release of the checkra1n tool to support Linux. checkra1n was only available for macOS. With the addition of Linux support, it is now easier for iPhone and iPad users to jailbreak their device running iOS 13 – iOS 13.3.1.

checkra1n 0.9.7 beta

This release is a beta preview and should not be installed on a primary device.

Bug fixes- 0.9.7 beta

  • Fixes an issue that prevented the GUI from detecting changes in device modes.
  • Fixes an issue that caused the GUI to hang when jailbreaking some iPad models.

Other changes

  • Add initial Apple TV 4K support
  • Add support for iOS 13.3
  • Purge OTA updates on boot
  • Properly handle situations where there’s no internet connection available while bootstrapping tvOS
  • Add a Control Center shortcut for the tvOS loader app

If you are experiencing the -20, please re-jailbreak with the no-substrate mode option checked in the app, and see if removing tweaks resolves your issue.

Known issues

The Apple TV 4K will produce a -20 error, even on a successful jailbreak.

Unsupported devices

Support for the following devices is experimental, and may require more attempts than usual:

  • iPhone 5s
  • iPad Mini 2
  • iPad Mini 3
  • iPad Air

Reliability on these devices will be improved in future releases.

13 thoughts on “checkra1n Jailbreak Windows, LINUX and Mac guide”

  1. Checkra1n 0.9.6 doesn’t open in my mbp13 mid 2009 El Capitan whereas the older checkra1n 0.9.5 and 0.9.2 opened successfully.
    Is this the case? Doesn’t work on El Capitan?

  2. Do you have a spam issue on this website; I also am a blogger, and I was wondering your situation; many of us
    have created some nice procedures and we are looking to swap
    strategies with others.

  3. I love what you guys are up too. This kind of clever work and reporting!
    Keep up the superb works guys I’ve included you guys to our blogroll.

  4. joyful-in-his-grace.tumblr.com

    Its not my first time to pay a visit this site, i am visiting this
    ssite dailly and take pleasant faccts from here daily.

    1. The Checkra1n app has been updated to a newer version for better compatibility and less problems, making it a more stable iOS 13 jailbreak tool.

  5. Heey there! Someone in my Myspace group shared this website with us so I cae to look it over.
    I’m definitely enjoying the information. I’m book-marking and will be tweetjng
    this to myy followers! Superb blog and terrdific style and design.

Leave a Comment

Your email address will not be published. Required fields are marked *